Categories

False alarms and system hiccups can be exasperating, and even more concerning, might prevent your security system from working the way it should. Luckily, most troubles, from false alarms to dead batteries, are easy to correct. Take a look at our suggestions for troubleshooting your home alarm system in Asheville. We’ll help keep your family members shielded and your system running smoothly.

Test Your Home Security System In Asheville

One effective way to troubleshoot your home’s security is to test it! Newer systems allow you to place them in test mode to avoid initiating an emergency call. After switching to test mode, take these steps:

• Turn on your system as you normally would when you exit your home.
• Open a door or window protected by a contact sensor, or try to trip another device. Close the door or window so it doesn’t trip the alarm when you switch the system back on.
• Let the alarm sound for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test devices as you wish
• Review the alarm’s activity log to verify that everything’s working.

No need to worry, monitoring specialists can see that your system is undergoing a test. Just make sure to turn test mode off when complete. It’s wise to test once a month or whenever you make changes to your home’s internet or phone provider.

Evaluate The Positioning And State Of Motion Sensors

Although an crucial element of your alarm system, motion sensors are notorious for false alarms. You can help prevent them with some simple troubleshooting.

• Do a physical inspection. Is there anything that could shift within the sensor’s detection range, like a window treatment caught in a breeze?
• Is the sensor clean? Dirt, cobwebs, and debris can lead to poor performance. Make sure the device is clean.
• Does the motion detector come with pet immunity you can turn on? Some models can be programmed to ignore pets weighing as much as 100 pounds.
• When was the battery last replaced? A low battery might affect performance or cause false alarms.
• Is the sensor aimed toward a heat source? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Watch Out For Low Battery Signals

One of the great things about modern home security systems is that they’ll tell you when batteries are getting low. If your system uses a mobile app or control panel, you’ll often see notifications there. Depending on your system, you could hear an intermittent beep when batteries are running out. 

Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that should be replaced every so often. It’s best to keep batteries ready and establish a replacement schedule. Many systems also have a rechargeable backup battery for the central control panel. This backup battery helps keep your system operating if your power goes out and should recharge itself once power is restored. If it fails to recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Asheville 

As the foremost name in home security, ADT designs systems that offer unrivaled functionality and convenience. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always get updates when a battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Asheville home. Place a call to (828) 202-7229 or submit our form today!