Where To Place Carbon Monoxide Detectors In Your Asheville Home
Residents must defend against various risks like burglary, fire, and flooding. But what about a danger that you can’t see or smell? Carbon monoxide poses an uncommon challenge as you might never be aware that it’s there. Despite that, implementing CO detectors can effectively safeguard you and your household. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Asheville residence.
What Is Carbon Monoxide?
Called the silent killer as of a result of its absence of color, taste, or odor, carbon monoxide is a readily found gas produced by incomplete fuel combustion. Any fuel-burning appliance like a furnace or fireplace can produce carbon monoxide. Although you usually won’t have any trouble, issues can crop up when an appliance is not frequently serviced or appropriately vented. These oversights may result in a proliferation of this potentially deadly gas in your residence. Generators and heaters of various types are the most frequent culprits for CO poisoning.
When exposed to lower levels of CO, you could experience dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to higher concentrations could lead to cardiopulmonary arrest, and even death.
Suggestions On Where To Place Asheville Carbon Monoxide Detectors
If your home is without a carbon monoxide detector, get one now. Preferably, you ought to install one on each floor, and that includes basements. Review these tips on where to place carbon monoxide detectors in Asheville:
- Install them on each level, specifically where you have fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
- You ought to always have one no more than 10 feet away from bedroom areas. If you only get one CO detector, this is where to put it.
- install them at least 10 to 20 feet away from potential CO producing appliances.
- Avoid installing them directly above or next to fuel-burning appliances, as a non-hazardous amount of carbon monoxide could be emitted when they kick on and prompt a false alarm.
- Attach them to walls at least five feet from the ground so they will measure air where occupants are breathing it.
- Avoid using them in dead-air zones and next to windows or doors.
- Install one in areas above attached garages.
Test your CO detectors regularly and maintain them according to manufacturer instructions. You will generally need to replace units every five to six years. You should also make sure any fuel-burning appliances are in in good working order and have appropriate ventilation.